Khung nâng riser tích hợp đèn LED cho Elegoo Centauri Carbon

More streamlined riser to the printer body lines and add additional lighting to the poor factory lighting. This riser is low profile extended top for the Centauri Carbon and is designed to match the outer perimeter of the machine. This is my first model so please be gentle if I made any errors. Thank you for your understanding.

Disclaimer: I did not have a photo of my own so I used original authors for now. I will update when I get some time.

Carried over original design features and adjustments: 

• 57 degree angled surface inside to mount LED strip, 15 mm wide surface

• LED strip cable exit located on corner with filament sensor

• ~¾" overall height

• Easy assembly with dog bone joints/connectors

• Slightly larger recessed area for factory top glass panel

• Added 4 full length windowed glue-on panels to hold lights on if adhesive fails

You will need:

• x1 - CC Riser_Front

• x1 - CC Riser_Back

• x2 - CC Riser_Side

• x1 - CC Riser_Back Left

• x1 - CC Riser_Back Right

• x1 - CC Riser_Front Left

• x1 - CC Riser_Front Right

• x8 - CC Riser_Connector

• (optional) x1 - CC Riser_Elegoo Symbol

• (optional) - x4 windowed glue-on panels (best to print in at least PETG; I tried PLA and they warped over time)

Printing tips - For optimal assembly first calibrate your printer so the parts fit together well. Then you want the joints (or recessed area for top glass) printed facing up on all the parts with support material underneath.  This allows the joints to print at the intended shape for the connectors to fit in as designed.  Also, if you print high temp filaments often you may consider printing in PETG or higher.