Skip to main content
F3D
Hệ thống vách ngăn Sheffield 126XX 1

3 images

DIY

Hệ thống vách ngăn Sheffield 126XX

By QwermMakes

Downloads
3
Likes
1
Views
108

Files 4 1.1 MB

  • Sheffield_126XX_Divider_System_-_Top_1773275928.stepSTEP · 291 KB
  • Sheffield_126XX_Divider_System_-_Bottom_1773275929.stepSTEP · 420.1 KB
  • Sheffield_126XX_Divider_System_-_Divider_1773275929.stepSTEP · 44.1 KB
  • Sheffield_126XX_Divider_System_-_Multi_Plate_1773275931.3mf3MF · 352.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#244647
Category
DIY
Published

Description

A system for dividing Sheffield 126XX ammo boxes into multiple sections. The divider is securely held in place by the upper section, which itself is secured to the ammo box with nuts and bolts in order to prevent parts or ammo from possibly slipping past the dividers.

I have included photos of where to drill holes for the screws, but if you have a compact enough drill, you could also use the holes in the part itself to mark the holes from the inside.

Additional Hardware:

4x M3x12 Button Head Machine Screws

4x M3 Nuts

Recommended print settings:

Material: PETG if your in warmer climates.

Layer Height: 0.2mm

Wall Line Count: 3

Infill Percentage: 15%+

Support: No

This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/

Read more Show less

Print spec

Formats
3mfstep
Model files
4
Total size
1.1 MB
Largest file
420.1 KB

0 comments

See all