Bộ AutoClippy cho 3D Chameleon trên Neptune 4

This is my current AutoClippy modifications / designs to work on my Neptune 4 plus.

i have over 1000 filament changes using this system and it has been very reliable. if you wanted it to be more reliable i would recommend adding a filament sensor before the extruder gears. But since I'm stilling running stock Neptune OS i haven't added one.

the reason i did this instead of doing tip shaping is because i found with the stock Neptune 4 extruder set up, over 500 changes it would start filling up with little bits of plastic causing inconsistent filament changes.

with the AutoClippy all those issues are gone!

i have used PETG and i am currently using ABS printed parts.

For print settings i just used stock Voron settings, its probably a bit overkill but it seems to work well!

I also used auto tree supports. i will show photos of my current slicer settings so you can hopefully get the same results!

the STLs should open how i printed them, if not please match the photos I've uploaded.

if you have any questions please feel free to ask!

 i am using this servo
https://www.amazon.ca/dp/B07SWW9NDR?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1

i am also using this DC Step Down Converter Voltage Regulator
https://www.amazon.ca/dp/B07XXSK68F?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1

( I have not printed theses parts in awhile, so if somethings don't work please let me know! )

i hope everything works for you!