Punch the Monkey - Mô hình in đa màu (MMU)

Here is a model of Punch the Monkey and his friend. 

One photo shows it being actively printed. I made a YouTube video showing them being printed.  This was initially AI created,  and then manually modeled and painted.

I suggest printing three at once which takes about 16 hours with about 695 tool changes (about the same for four or five color). Make sure your wipe tower has generous settings to eliminate any bleed as shown in a photo here. The suggested 3mf here uses a .2 layer height, at 166% scale (66.69mm tall). Use auto generated organic supports at a 20% overhang. There are only a few small places it needs some support.

Suggested five colors in spool order with alternates in parentheses

1. orange - stuffed companion body

2. light gray (dark gray, light or dark brown) - Punch body

3. light beige (tan, sand) - monkey hands and face

4. black - eyes and mouth

5. white (light beige, tan) - eye pupils and rock base

Four colors:

1. orange - stuffed companion body

2. light gray (dark gray, light or dark brown) - Punch body

3. light beige (tan, sand) - monkey hands and face, eye pupils

4. black - eyes, rock base

I use  this Spool setup and have had great success. I am now going on 2x 16.5 hour prints with 695 changes each in batches of 3 with no issues or interventions on MK4S MMU3 setup I have.

Personal use only, no commercial use, no reselling, or republishing files to other platforms. (see license).