
Ốp chặn đầu ghi đông MTB (MTB bar end plate)
- Downloads
- 1
- Likes
- 0
- Views
- 72
- Remixes
- 1
- Comments
- 0
Files 6 12.8 MB
- bar_end_plate_part_1_stile_B_1773207651.stlSTL · 456.3 KB
- bar_end_plate_part_1_stile_A_1773207652.stlSTL · 230.7 KB
- bar_end_plate_Part_2_1773207653.stlSTL · 29 KB
- SS_bar_end_plate_part_1_stile_A_1773207654.gcodeGCODE · 5.8 MB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #242618
- Category
- Thể Thao & Ngoài Trời
- Published
Description
3d printed bar end plates(is that the right name?) inspired by revgrips prototipes seen on reece wilson bike, i liked them the most when (part 1) printed out of TPU 95A with 30% infill and 1.8 top/bottom thickness, i recommend printing part2 with a rigid filament like PLA, PETG or ABS maybe.
When briefly tested style A felt like it had more support, while style B felt "lighter".
They should help with arm pump apparently. I still have to properly test them.
To assemble them you need m4 hardware (at least a 20mm long screw).
Here is the onshape link if you want to make some changes: https://cad.onshape.com/documents/282e40acfeab6165cacc2d37/w/bd8a8228ad93672eeffc5757/e/c31692d5fe46d69f5d156ca3?renderMode=0&uiState=69ad38452d5ce4d9488b49ff
Print spec
- Formats
- gcodestl
- Model files
- 6
- Total size
- 12.8 MB
- Largest file
- 5.8 MB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-

-

-

-



