Mô hình Hueforge Hoàng tử Ashitaka trong Princess Mononoke

Project: Prince Ashitaka.hfp

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #0078bf PLA BambuLab Matte Marine Blue  Transmission Distance: 0.5
    #000000 PLA Geeetech Black  Transmission Distance: 0.1
    #005133 PLA+ Esun Pine Green  Transmission Distance: 1.2
    #57361c PLA Overture Chocolate  Transmission Distance: 0.2
    #7d6556 PLA BambuLab Matte Dark Brown  Transmission Distance: 2
    #de4343 PLA BambuLab Matte Scarlet Red  Transmission Distance: 2
    #b00f1e PLA Sunlu Matte Cherry Red  Transmission Distance: 2.2
    #ffb73e PLA Snapmaker Yellow  Transmission Distance: 5.3
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 9 unique filaments

Swap Instructions:
    Start with Marine Blue
    At layer #18 (0.84mm) swap to Black
    At layer #24 (1.08mm) swap to Pine Green
    At layer #25 (1.12mm) swap to Black
    At layer #28 (1.24mm) swap to Chocolate
    At layer #30 (1.32mm) swap to Dark Brown
    At layer #32 (1.4mm) swap to Scarlet Red
    At layer #35 (1.52mm) swap to Cherry Red
    At layer #39 (1.68mm) swap to Yellow
    At layer #44 (1.88mm) swap to Jade White for the rest.