Bản lề xoay dùng cho thanh nhôm định hình 3030

Print in PETG (at least for the horizontal part which needs to flex to install the bearing) and with 3 walls. The clicker is optional and only if you want to index the position.

Bill of materials:

Material

Qty

608 bearing

1

M3nS nut

3

M3n nut

1

M3x20 (or longer) screw

1

M3x8 (or longer) screw

3

M5n nut

1

M5x14 (or longer) thumb screw

1

1. Insert nuts into their respective locations. The M5 nut can be tricky so I recommend drawing it into place by screwing it in.

2. Install bearing into the horizontal part by flexing it open just enough to insert the bearing

3. Install horizontal assembly onto the 3030

4. Slide clicker into the horizontal assembly but do not fix into place

5. Install vertical lower onto 3030 and affix with M5 screw

6. Install vertical upper onto 3030 but leave space

7. Place horizontal 3030 into place on top of the vertical lower.

8. Lower the vertical upper into position and affix using M3x20 screw.

9. Slide clicker into position and fix with M3 screw.