Tác phẩm điêu khắc 3D Chambre 004

The Open Chambre series is a collection of 3D-printable sculptures released as open-source art by Tokyo-based artist V-XL (Baptiste Tavernier).

While the primary Chambres archive consists of singular, unique physical works, the Open Chambres are shared here for the maker community to replicate and enjoy.

• Artist: V-XL (Baptiste Tavernier)

• Format: 32 x 27 x 6 cm ; Optimized for FDM 3D printing.

• Printer: Parts were kept small on purpose, so they should fit on a Mini if you don't have a regular size printer.

Explore the Full Archive: To see the singular physical works and the different aspects of this project, visit the official terminal: https://v-xl.art

***********************

Specimen:
"Monteverde Angel (also known as the Angel of the Resurrection), from the Staglieno Monumental Cemetery in Genoa, Italy. Created in 1882 by the Italian sculptor Giulio Monteverde, the angel guards the tomb of the Oneto family. While many cemetery statues are meant to be overtly mournful or holy, this one is famous for its ambiguity."

***********************

🛠 PRINTING PROTOCOLS

• Aesthetics: Optimized for any material. Standard Color Scheme: Matte black frames with high-vis color accents.

• Hardware: All V-XL modules utilize M3 x 8mm screws and M3 square nuts (5.5 x 5.5 x 2.6mm) for fastening.

• Specs: 0.4mm nozzle recommended. Use a brim to ensure structural integrity and prevent warping when printing the base.

This module is divided into several files.

—First, print the 4 "Base" files (Standard Color Scheme: black). They do not need supports, but a brim can help stabilize the base onto the printer’s plate.

— Then print "Angel“ in 2 colors (S.C.S.: black plate, white statue, with a filament change just after the plate). You fill need some supports for the arms and the bottom of the wings.

— Then print “ Genoa - Main inlay.stl “ (S.C.S.: blue) together with “ Genoa - Small inlay x4.stl “ if you want them with the same color (you will need 4 small inlays). Or print the separately if you want them in different colors.

— Then print all the Inlay files (S.C.S.: blue). You will need to print Diamond inlay 4 times.

— Fasten the Base modules with M3 x 8mm screws and M3 square nuts (5.5 x 5.5 x 2.6mm) ; glue all the inlays into the Base ; then insert the Angel in its base.

— You can glue the Angel if you want to fix it permanently, but there might be more models in the future that can fit in there (or you can make your own too) so you might want to keep it removable

————— © V-XL // Baptiste Tavernier