Hộp LTT Screwdriver - Bản 12Bit và 24Bit

Just another case for the LTT screwdriver.

I sliced the model with PrusaSlicer 2.5.0 without adjusting any setting and printed it with the inside of the case facing down.

Added a version 2:

• added 2 pairs of magnets at the latch
• deepened the top recess to fit standard length bits (25mm)

Added a version 3:

• fits 24 instead of 12 extra bits
• V3 is 30mm longer

What you need additionally:

• 16 neodymium magnets 5x1mm (20 if you print Version 2)
  https://www.amazon.de/dp/B07T13H3R5?psc=1&ref=ppx_yo2ov_dt_b_product_details
• 3 mini barrel hinges 25x5mm
  https://www.amazon.de/dp/B093PMWZGG?psc=1&ref=ppx_yo2ov_dt_b_product_details

The magnets have to be glued into place with superclue. Don't use hot glue or any other “thicker” type of glue, because the magnets won't be flush with the surface otherwise.

Print Settings:

• Resolution: 0.20
• Supports: yes
• Infill: 15%
• Filament Material/Brand: PLA/Das Filament
• Color: Schwarz matt & Reinorange

Printed with Prusa i3 MK3S.

Be aware that the relatively hard PLA might scratch the screwdriver surface. But that's the same with any case made out of hard plastic.