Tay đỡ camera cho Prusa Enclosure (Prusa Enclosure Camera Arm)

Compatible with the ESP32 camera case from @MichalFanta;

For design I used this model of the enclosure from @GiantBrain, thanks!!

Hardware you need:

• a couple of M3 bolts w/ nuts to secure the support to the enclosure 
• M4 or M5 bolts to join the links, minimum length 20 mm with inserts or >20 mm with nuts. 

On the photos the long arm and the elbows are printed:

• 5 perimeters
• no top layers
• no bottom layers 
• honeycomb 20% infill

The ESP32 case shown in the photos is this one [LINK]