Kit Card Xếp Hình Chim Trang Trí 3D

Colorful Bird 3D Puzzle with various coloring options and easy scaling

• 23 Individual pieces provided for full custom color
• Build plate arrangement for single color prints. Print two or more single color plates in different colors to mix single color parts on multiple birds
• Three color swap build plates to achieve dual color parts to mix on one bird with 6 colors. Available in two different part sorting options.
• Three Kit Cards for either dual color swap with then 6 colors. Or print them single color for then 3 colors per Kit Card Bird.
   
• Scale the build plates proportionally while the z-height must be a divider of your chosen layer height.
  The model is designed for 1.6mm z-height which results in a roughly real life size sparrow of 160mm length. Up-scaling is only limited by your build plate size. Down scaling has been tested up to 0.8mm z-height with a model length of then 80mm.

Print hints

• The color names in the file names are only suggestions but should hint at the type of color to use for a plate. I.e. grey/black suggests any dark color, blue/red the base color. and rose/white a bright highlight color.

Assembly hints

1. Start with the center connector and slide the body parts onto it. If the parts do not easily fit, consider to sand the connector plate down a bit. The top side of the print might be not as clean as the build plate facing side and give bad tolerance.
2. All the parts are mirrored on the provided 3mf project files. This means you can easily guess their orientation by minding that the build plate facing side of a part is always the outside of the model.