
Móc khóa Halloween thú cưng skeleton dễ thương – 7 mẫu
- Downloads
- 315
- Likes
- 89
- Views
- 916
- Remixes
- 0
- Comments
- 0
Files 8 11.6 MB
- panda_v0_1772753432.stlSTL · 1.9 MB
- pony_v1_1772753434.stlSTL · 1.8 MB
- bunnny_v2_1772753434.stlSTL · 1.4 MB
- hamster_v1_1772753436.stlSTL · 1.8 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #239310
- Category
- Trang Phục - Phụ Kiện
- Published
- License
- Standard Digital File License
Description
Set of 7 different animal Halloween characters as keychains. Ferret, Bunny, Racoon, Pony, Panda, Red Panda, Turtle
If you don’t have a multi-color printer like I don’t, you just need to set a pause at layer 11 when slicing this file. When the printer stops at layer 11, change the filament to white.
Start with black, then switch to white.
-I recommend setting your printer to a slow speed (up to 100 mm/s) to avoid messing up the small details.
-I’ve printed all my designs in both PLA and PETG, but I recommend PETG. If you leave your keys in a hot car, you don’t want your keychain to deform from the heat, which could happen with PLA.
-Set the infill to 100% if you plan to use the keychain in real-life conditions. The keychain will be under a lot of stress in a bag or pocket, so it needs to be strong to avoid breaking.
All designs shared here are created for hobby purposes only. I do not sell these designs, nor do I grant anyone the license to sell them. These designs are provided for free to the community for personal, non-commercial use only.
Enjoy!
Print spec
- Formats
- stl
- Model files
- 8
- Total size
- 11.6 MB
- Largest file
- 1.9 MB











