Magic Harry Potter hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 175x173.86mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #14 (1.2mm) swap to Orange
At layer #21 (1.76mm) swap to Yellow.