Hộp Đựng Bài MTG Rugged Deck Box

Remixed rugged box for holding Magic the Gathering decks, or loose cards. Tight enough to hold the cards without smashing them or the sleeves, but loose enough to not need to jam the cards in. The hinges use M3x25mm bolts, https://monsterbolts.com/products/socket-set-cup-b14-9-m3?variant=36345376396 or similar provide a more seamless look due to lack of bolt head, but any of the appropriate size should work.

Printing tips:

• No supports needed.
• 3-4 walls and top/bottom layers have been sturdy enough for most usage for the box, lid, and latch.
• Any material for the box and lid, PETG recommended for the latch, and TPU for the seal.
• Any infill pattern and percentage as it is primarily between the top and bottom layers of the box and lid.

Note: The bolt tolerances may be tight initially but will loosen up over time.