Ngàm gắn đèn trần (Ceiling Lamp Mount)

Crafted through 3D printing on common FDM printers, this innovative device incorporates a strain relief mechanism, enabling simple adjustment of the cable length for achieving the perfect hanging position.

• The mount features a 6mm hole for secure hook attachment to the ceiling 
• 8mm hole to accommodate the lamp cable, ensuring a secure and reliable fit.
• For enhanced versatility, it can be paired with an alternative cup with a hole diameter ranging from 14mm to 17mm, catering to diverse preferences.
• Printing Instructions: To simplify the setup, utilize the attached Slicer project file with pre-configured parts.
• Print without support for optimal results.
• For improved adhesion, consider adding a brim for the screw part.
• The screw and nuts have been tested with a 0.2mm layer for guaranteed performance. 
• For a pristine bottom surface of the cups, utilize a spiral (Archimedean chords) pattern for the bottom layer.

Experience the convenience and adaptability of our 3D printed Ceiling Lamp Mount, the ideal solution for seamless and reliable pendant lamp installations.

Assembly Instructions:

• Position the cable to run between the rings.
• Note that the rings have a radius on one side. 
• Ensure that the rings are turned with the round edge to press on the cable securely.

Two cover designs available for the ceiling lamp mount:

Simple Classic Cover Cap:

•  This extra-large cover cap is designed for worst-case scenarios involving long hooks and large wiring. It provides a straightforward and classic solution for various mounting needs.

Modern Design Cover Cap:

•  Comprising of two parts, the cup top and cup base, available in several sizes, this cover cap offers a more aesthetically pleasing option while still accommodating diverse requirements.
  These two design options provide flexibility to cater to different preferences and installation scenarios.

Ceiling hook setup:

For cover caps with total high 73mm ceiling hook must be in range 24-40mm.

For cover caps  with total high 68mm ceiling hook must be in range 22-37mm.