Vỏ (Housing) cho Simple Handled Thermal Imager

I bought a very basic thermal imager, and it's sold as just circuit boards assembled together.
I made a housing for it so I wouldn't have to worry about damaging the device itself.

The case halfs snaps into place.

Optionally, you can print a lens protector with twist-lock.
One of the pieces will need to be glued into the grooves on the front of the case
(The cover and case have slots so you can attach the cover with thin rope and prevent it from being lost)

Be careful. Not all devices have the same camera position relative to the board.
If my solution doesn't fit for you, you can try this similar one:

If you found my model useful, you can buy me a coffee