
Kẹp Nội Thất Modular Không Dùng Vít, Góc 90 Độ
- Downloads
- 114
- Likes
- 48
- Views
- 4,628
- Remixes
- 0
- Comments
- 0
Files 1 43.1 KB
- furniture_clamp_1772678935.3mf3MF · 43.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #236235
- Category
- Đồ Gia Dụng
- Published
Description
Simply take any wood that you have lying around and turn it into anything!
This is a clamp that lets you attach 2 Boards perpendicular to each other. Turns out - most of our average furniture needs can be met by that.
Want a sideboard? A bed? A hanging Shelf? just arrange it yourself.
This is basically a hyper-ikea model, where you not only have to do the assembly yourself, but also the planning beforehand. And then again, once you decide to rearrange. And again…
I think 3D printing does not need to be all about plastic trinkets and figurines. It can do a relevant part in extending the lives of the materials around us.
These clamps will enable you to turn raw materials into furniture and then back into the very same raw materials.
You will need:
A DIN 7991 M6 Screw, i took 30 millimeters, which works for boards between 12 and 18 millimeters. This should cover all the usually available OSB boards everywhere.
A matching M6 square nut, DIN 562
→ there is a normal size and a slim size, only slim will fit the model. Consider really checking the DIN Number.
Wood / Material of your choice, thickness between 12 and 18 mm
I printed and tested them with PETG and 3 Shell lines.
I would have concerns for longevity if you printed this in PLA and then left it near a window with direct sun.
Print spec
- Formats
- 3mf
- Model files
- 1
- Total size
- 43.1 KB
- Largest file
- 43.1 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-
New -

-

-

-
New -


