Thanh Rail Multiconnect cho Multiboard

Remix of Multiconnect cho Multiboard v2 - Tệp mô hình By DavidD

By DavidD

Downloads: 225
Likes: 37
Views: 1,565
Remixes: 0
Comments: 0

Download all (.zip)· 7 files · 350.4 KB· 350.4 KB

Files 7 350.4 KB

Multiconnect_for_Multiboard_-_1x_Rail_1772629702.stlSTL · 53.4 KB
Multiconnect_for_Multiboard_-_2x_Rail_1772629702.stlSTL · 49.1 KB
Multiconnect_for_Multiboard_-_3x_Rail_1772629703.stlSTL · 49.1 KB
Multiconnect_for_Multiboard_-_1x_Rail_1772629704.stepSTEP · 23.4 KB
Multiconnect_for_Multiboard_-_2x_Rail_1772629705.stepSTEP · 23.5 KB
Multiconnect_for_Multiboard_-_3x_Rail_1772629706.stepSTEP · 23.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #235441
Category: DIY
Published: 03/04/2026
License: Creative Commons — Attribution — Noncommercial — Share Alike
Tags: multiboard
multiboardremix
multiconnect

Show more tags Show fewer tags

Description

Want some extra strength when using multiconnect on your multiboard? Use the multiconnect rails to connect multiple connector heads using a rail. This rail will increase the area the parts are touching and by doing so increase the strength.

Howto use: To attach the rails in between your connector heads you need to remove at least one side from your board. Do so, slide the rail in between, then attach everything again.

Printing instructions: All models are provided in the orientation they should be printed. Use at least 3 perimeters and I suggest at least 20% infill. I'm using the grid infill pattern, but others might just be fine. Please don't print in “superfast” (/"SPEED") mode, use “STRUCTURAL” for Prusa printers for example.

Credits to Jonathan (KeepMaking) for creating multiboard.