Case Raspberry Pi 5 V3

In my latest iteration I have scaled up the micro HDMI port holes because i found that they were to small for my cables. 

Furthermore I added a channel that leads straight to the fan serving to increase airflow efficiency

I have also reworked the entire case to be only two parts instead of 3

This is compatible with the active cooler.

I would recommend printing in PET-G, ABS, or other heat resistant filament 

No supports are needed if your printer is good with overhangs. If not turn on support “normal” “only on build plate” to support the small overhang near the micro SD card port.

Leave a like or a make I love to see your models

If you have an idea for a model leave a comment or message me

Profiles

_ABS_

Brim: yes 

Supports: no

Layer Height: 0.2

Infill: your choice

Walls: 3-4

_PET-G_

Brim: no

Supports: yes "normal only on build plate"

Layer Height: 0.2

Infill: our choice

Walls: 3-4

_PLA_

Brim: no

Supports: no

Layer Height: 0.2

Infill: your choice

Walls 2-3