
Đồ Gia Dụng
Đồng hồ treo tường Sunburst Mid Century Modern
- Downloads
- 166
- Likes
- 87
- Views
- 1,129
- Remixes
- 0
- Comments
- 0
Files 6 499.1 KB
- Hands_1772582670.stlSTL · 38 KB
- Housing_1772582671.stlSTL · 197.3 KB
- SpokesX12_1772582672.stlSTL · 147.7 KB
- Hands_Blank_1772582673.stlSTL · 28.8 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #234722
- Category
- Đồ Gia Dụng
- Published
Description
Please rate and post your makes!
Bring back the mid century style by printing your own Sunburst Clock
- DIY Clock kit
- M3 x 8mm screws x12
The clock face is 5mm thick if your clock kit has a shorter stem, you can use a negative part in your slicer to thin the base enough. I've also included some blank hands if your clock kit's hands have a different fit.
If you manage to make hands for your specific kit, please consider uploading them as a remix as an option for others!
Assembly
- Place the clock mechanism inside the base, tightening the nut outside around the shaft to keep it in place.
- Start threading the bolts through the printed spokes until the screw is just barely poking through.
- Hold the spoke in place against the cutouts in the base and screw till tight, Don't over tighten!
- Press fit your Hour then Minute hand down into their places on the mechanism shaft.
- Press fit the hanger piece into it's place on the back of the base.
- Rotate the entire clock mechanism inside to line up the battery slot with 6 o-clock and the top of the mechanism with 12 o-clock
- Battery, set time, hang and done!
Print spec
- Formats
- stepstl
- Model files
- 6
- Total size
- 499.1 KB
- Largest file
- 197.3 KB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-

-

-

-


