Kệ phẳng lớn đơn giản cho Honeycomb Storage Wall

16.01.2025 Update

• I have added BambuStudio 3mf Profile

This is a remix of my Shelf I made for Multiboard. So if You need a Multiboard version, just go to original version this Remix is made from. Shelf is presented in two versions. 200mm and 150mm deep. Shelf is 163.41mm wide. Shelves can be stacked sideways so they will make one long shelf if you need. Support brackets are quite lightweight but strong enough to support some weight. Use a Insert-Empty.stl from original HSW model by rostap to fit Support Brackets to the wall. Pegs are made quite tight for stronger fit, so according to your printer tolerances it is possible that You will need to shave them a bit or if they are still too loose in your case I suggest to use a glue.

Shelf Flat base is made to slide in the support bracket rails, so if needed you can take it off any time and switch to other one if needed. I have made two holes for cables at a bottom of Base in case you will use it for some kind of electrical unit with cable.