Kệ góc phòng tắm (Shower corner shelf)

The basic idea behind this model is - I need a shelf in my shower, but I'm not allowed to drill into the tiles.
To attach it, you need a silicone based glue (e.g. Mamut Glue Crystal by Den Braven)

Apart from that, there is a couple of features I kept in mind modelling it:

• All edges facing the space must be rounded
• All edges facing the walls must not be rounded
• The cutouts in the floor must be at least interesting if not pretty :)
• Needs to be removable for cleaning
• Has to hold unnecessarily strong enough (one anchor can hold 10kg)
• To change something broken has to be as easy to replace as possible (glued anchors, sliding shelf)
• Needs be modular => it has to be possible to repelace shelf for a new one, for a different one, or repurpose the anchors all together. This one only applies in the way my project is structured.

I strongly suggest printing out of PETG or some material withstanding the temperatures and wetness.
Use as much infill as it is comfortable for you - the model integrity will be the weak spot. Not the glue if applied properly.
I print with 0.25 nozzle and 0.07 layer height - yes, it is going to take two days, but It'll be pretty <3 Feel free to compromise here.