Gunstock VR ngon nhất mà bạn KHÔNG mua được… nhưng in được (Quest 3) – Bản chạy thật

New Updates

I modified the front stock to have a larger hole that actually fits the washers from Amazon. I have again modified the rear stock and the butt stock component to be a bit beefier, and have a bit more of a robust indexing system. I found the original to break after a bit of use. I am currently working to make the holder for the front grip a bit thicker, as I have notices that even when printing with CF-PETG and GF-ABS that I cannot prevent the front grip from eventually delaminating at the base of the relief slit on right half(if viewed as though holding the gun stock.

Description

Virtual Reality Gunstock for Meta Quest 3

Unlock a new level of immersion in your VR gaming experience with this custom-designed virtual reality gunstock for the Meta Quest 3. This lightweight accessory, weighing under 120 grams, is engineered using advanced topology optimization and generative design, ensuring optimal performance without sacrificing comfort.

Key Features:

• Secure Controller Attachment: The controllers click firmly into place via the battery lid opening, providing stability during gameplay.
• Adjustable Length: Tailor the gunstock to your preferred length for enhanced comfort and usability.
• Comfortable Shoulder Pad: The TPU rubber shoulder pad is designed for extended gaming sessions, offering a soft touch that makes a difference.
• Adjustable Cheek Guard: Rest your cheek against the guard for perfect eye-level alignment, enhancing aiming precision.
• Split Design with Magnets: The gunstock conveniently splits in the middle, allowing for independent hand movement without losing grip on the stock.

Printing Information:

I recommend using PETG for all Stock Parts. But i tested the PLA one for weeks and it held up awsome.
When Printed in FDM the Snapfit of the batterylid might not really hold on super well (especialy in PLA it tents to break).
U can still use the straps and with that hold the Controller in if that happens.

I used a magnet with 32 kg of holding force. I Tested different ones and this one i think is ideal.
I also uploaded a left handed Version.

This one should work: https://www.amazon.de/dp/B08XLF93HS/ref=sspa_dk_rhf_search_pt_sub_2/?_encoding=UTF8&ie=UTF8&sp_csd=d2lkZ2V0TmFtZT1zcF9yaGZfc2VhcmNoX3BlcnNvbmFsaXplZA%3D%3D&pd_rd_w=h6Nr9&content-id=amzn1.sym.9c86a94b-fc6c-4aef-96cd-b23f37503aaa&pf_rd_p=9c86a94b-fc6c-4aef-96cd-b23f37503aaa&pf_rd_r=2YNE250CCZNM9JQ5ZD4P&pd_rd_wg=QaDTn&pd_rd_r=2e2b3243-e112-4601-974a-24797dbb01a2&ref_=sspa_dk_rhf_search_pt_sub&th=1

Link for the US:
https://www.amazon.com/dp/B0CDR4SXGZ?ref=ppx_pop_dt_b_asin_title&;th=1

I bought mine in the department store 

If u Print it in SLS PA12 (what i did at the end as well) u might need to heat the ratchet mechanism for the cheek rest and bend it in a little because it tents to curl open a little. Also the same if u experience this in FDM.

Download the 3D Model:

Feel free to download the STL files and start your own DIY project. Whether you’re a seasoned maker or just getting started, this gunstock is a fantastic way to enhance your VR setup.

References and Acknowledgement

While i still drawn it my self i took inspiration for the splitting from this Project:
https://makerworld.com/en/models/434027?from=search#profileId-361691

and for the cups from the original designer:

https://www.thingiverse.com/thing:6289919