
Bộ Truss & Phụ Kiện Đầy Đủ (Complete Truss & Accessory Pack)
Remix of Thanh Truss và Góc Dọc 2 Hướng (Truss Sticks & 2 Way Vertical Corner) By d3dp
- Downloads
- 1,625
- Likes
- 220
- Views
- 8,408
- Remixes
- 0
- Comments
- 0
Files 19 15.4 MB
- truss_100_LP_1772435526.stlSTL · 447.7 KB
- truss_100_nosupport_1772435527.stlSTL · 431.3 KB
- truss_200_LP_1772435528.stlSTL · 797.1 KB
- truss_200_nosupport_1772435529.stlSTL · 591.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #232772
- Category
- Lego & Khối
- Published
- License
- Creative Commons — Attribution
Description
0.5mm extrusion width, No infill, 2 perimeters, side plates 100% infill
M4x20 or M4x25 hardware, recommend wingnuts or 8-32 imperial
All files have been test print on a MK3s+/CR10s printed in PETG.
If there's a piece missing shoot me a msg so I can make it!
Files:
-truss_100_LP.stl (truss stick 100mm, low profile support)
-truss_100_nosupport.stl (no support)
-truss_200_LP.stl (truss stick 200mm, low profile support)
-truss_200_nosupport.stl (no support)
-truss_350.stl (truss stick 350mm, custom support)
-truss_350.stl (no support)
-4way_vers_corner.stl (4 way corner, print 100% infill)
-offset_corner.stl (3 way corner offset for bolts)
-2way_vert_corner_v2.stl (2 way corner for vertical use)
-truss_plate.stl (truss plate to accommodate wingnuts)
-truss_plate_thin.stl (self explanatory)
-half_cube.stl (25mm truss stick, 100% infill)
-parrot_stand.stl (truss topping mount to avoid ratchet straps)
-grapple.stl (attach truss in stranger ways!)
-screw_jack_{a,b,c}.stl (adjustable height adjustment)
-hinge.stl (use for angled supports or doors M4x44)
Print instructions
0.5mm extrusion width, No infill, 2 perimeters, side plates 100% infill
Current Work:
-Curved truss: https://www.printables.com/model/277642-curved-truss
-angled piece
-fishline chain motors
Changelog:
- added hinge.stl
- changed inner chord diameter from 4mm to 2mm for easier printing on other machines
- added 350mm no support
- added tuned gcode for truss_200_LP.stl on mk3s+
- (truss_200_LP.stl) added low profile supports to achieve less waste/save prep time
- (truss_accessories.3mf) updated to include infill on bottom 1mm for truss_200 and truss_350 to accommodate prusa slicing error resulting in weak bed facing horizontal stretchers
Print spec
- Formats
- gcodestl
- Model files
- 19
- Total size
- 15.4 MB
- Largest file
- 8.6 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-
New -

-

-

-

-

-


