Mouse Bambu Lab – Vỏ chuột 3D cho bo mạch Bambu Lab

the goal was to make a 3D mouse with the electronic card from Bambulab thta they gave you when you order one. The main difficulty was to recreate the whole base, and then to make a top piece to fit with the base and to make the clicls and scrool usable. The hardest part to do was the base, because you had to make the différents techical parts of the mouse to fit altogether, for example the switch to switch on and off the mouse. And the laser, those pieces had to be aligned altogether while managing to make a battery to fit into it. One of the problems with the current model is that the scroll is hard to access, and the electronic card is not really still and need to be screwed up in order to not fall apart. And maybe the elements altogether might need a system to be holded together, and the battery need  a cache. This was our firt 3d project, we did it with Onshape and we tried our best. We learnt a lot through the process and i would like to do it again. Maybe this time we would find a better solution. on top of that we didn't had a battery so we couldn't check if our project was working but i Believe it is.