
Dao cắt Filiment cho Toolhead E34M1
Remix of Bộ Cắt Filament cho EVA3, Orbiter, Rapido By billyd
- Downloads
- 135
- Likes
- 23
- Views
- 1,192
- Remixes
- 0
- Comments
- 0
Files 11 55.5 MB
- cutter_right_eva3_dragon_uhf_mount_1772401927.stlSTL · 2.1 MB
- cutter_right_eva3_rapido_mount_1772402166.stlSTL · 4.3 MB
- cutter_actuator-Mount_1772402166.stlSTL · 675.2 KB
- cutter_actuator-ArmLW_1772402167.stlSTL · 539.2 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #232308
- Category
- Máy In 3D
- Published
Description
This is an old version use this updated version that works with all hotend mounts instead
https://www.printables.com/model/1141394-e34m1-filament-cutter
For the lever spring you will need a 5x20mm spring, a smaller spring can be used but the I.D. must not be below 3 as it goes around a m3 screw to keep it in place.
https://www.amazon.com/gp/product/B09C1DDHRV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
For the cutter you will need a #4 hobby cutting blade cut to 28mm mounted with a 3mm hex screw
https://www.amazon.com/gp/product/B07QP8L1QG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
It's recommended to use the LW actuator arm that mounts directly to the X gantry. You will need slightly longer m3x35 screws to secure it down as it replaces the 3 screws that is used to hold the X gantry together
Revision 1: found that screw inserts on actuator arm LW are slightly too long. Reduced the length by 1.5mm
Print spec
- Formats
- stepstl
- Model files
- 11
- Total size
- 55.5 MB
- Largest file
- 45.5 MB
0 comments
You may also like 12 models
See all-

-

-

-
New -
New -
New -
New -

-

-

-

-

