Skip to main content
F3D
Kệ Đỡ Laptop - Thiết Kế Honeycomb 1

7 images

DIY

Kệ Đỡ Laptop - Thiết Kế Honeycomb

By Winnie

Downloads
190
Likes
61
Views
878

Files 7 567.4 KB

  • Side_1772381912.stlSTL · 209.8 KB
  • Brace_13cm_Optional_1772381914.stlSTL · 29.6 KB
  • Side_Mirrored_Optional_1772381915.stlSTL · 209.8 KB
  • Brace_15cm_Variant_1772381916.stlSTL · 29.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

🐻

Laptop Stand - Honeycomb Design

🐻

This sleek, minimalistic Z-shaped laptop stand is designed to hold laptops ranging from 10” to 17”. Featuring a honeycomb infill pattern, it combines a lightweight build with sturdy performance, while reducing filament usage. An optional hex-shaped brace slots seamlessly into the honeycomb pattern, providing additional stability.

Dimensions:

  • Depth: 20cm
  • Width: 13cm (brace length)
  • Side Width: 1.5cm

Key Features:

  • Universal Fit: Accommodates laptops from 10” to 17” with a 15-degree incline for improved ergonomics.
  • Honeycomb Infill: Lightweight and strong, with an optional hex brace for extra support.
  • Mirrored Assembly: Includes two sides, one of which should be mirrored for a uniform appearance.
  • Adjustable Brace: Features a 0.15mm offset for smooth assembly; can be resized in length as needed.
  • Pre-Oriented Models: All parts are pre-oriented for hassle-free printing.
  • No Supports Required: The design does not require supports.
  • 📣 Customization: Need adjustments? Share your requirements in the comments, and I’ll provide updated model files!

Print Settings:

  • Printer: Ender V3 KE
  • Layer Height: 0.16mm
  • Supports: None required
  • Seam: Scarf seam (optional)
  • Infill: 15% Gyroid
  • Top/Bottom Layers: 4
  • Walls: 3
  • Material: Hyper PLA Gray
  • Material Usage: 50g (Both sides + Brace)

Printing Tips:

  • Use the provided tolerance test files (female and male hex ends) to check fit before printing the full model.
  • Print the brace on its side for easier setup.
  • Use the included layout image for optimal printing layout.
  • For durability, print in heat-resistant materials like PETG or ASA to handle laptop heat.

Print Time:

  • Each side: ~1.5 hours, 20g filament
  • Brace: ~15 minutes, 9g filament

Elevate your workspace with this sleek laptop stand—designed for style, function, and efficiency!

Read more Show less

Print spec

Formats
stl
Model files
7
Total size
567.4 KB
Largest file
209.8 KB

0 comments

See all