Ngàm gắn Velcro cho Ikea Skadis

A strong mount to attach Velcro / hook and loop loops and straps to IKEA SKÅDIS pegboards. It is a remix of the Velcro Clip by Pavel Riedl that has been adapted to work with Skadis T-Nuts for easy and secure installation on Skadis pegboards.
Works with cinch straps as well as velcro tape from a roll.

Read more about the Skadis T-Nuts Mounting System and check out the Skadis T-Nuts Collection for more Skadis accessories that use T-Nuts.

BOM

Qty

Description

Sourcing

1

M2.5x12mm (or longer) Socket Head Cap Screw

Aliexpress

1

M2.5 DIN934 Hex Nut

Aliexpress

Printed Parts

Qty

Part

Download

1

Velcro Mount (choose size and orientation)

this project

1

Skadis T-Nut M2.5

Download here

Sizes

Files are available in the most common metric and imperial sizes and in vertical or horizontal orientation.

Metric

File

Orientation

Velcro Width

Velcro Mount Vertical 8mm.stl

Vertical

8mm

Velcro Mount Vertical 10mm.stl

Vertical

10mm

Velcro Mount Vertical 12.5mm.stl

Vertical

12.5mm

Velcro Mount Vertical 15mm.stl

Vertical

15mm

Velcro Mount Vertical 16mm.stl

Vertical

16mm

Velcro Mount Vertical 20mm.stl

Vertical

20mm

Velcro Mount Vertical 25mm.stl

Vertical

25mm

Velcro Mount Vertical 30mm.stl

Vertical

30mm

Velcro Mount Vertical 50mm.stl

Vertical

50mm

Velcro Mount Horizontal 8mm.stl

Horizontal

8mm

Velcro Mount Horizontal 10mm.stl

Horizontal

10mm

Velcro Mount Horizontal 12.5mm.stl

Horizontal

12.5mm

Velcro Mount Horizontal 15mm.stl

Horizontal

15mm

Velcro Mount Horizontal 16mm.stl

Horizontal

16mm

Velcro Mount Horizontal 20mm.stl

Horizontal

20mm

Velcro Mount Horizontal 25mm.stl

Horizontal

25mm

Velcro Mount Horizontal 30mm.stl

Horizontal

30mm

Velcro Mount Horizontal 50mm.stl

Horizontal

50mm

Imperial

File

Orientation

Velcro Width

Velcro Mount Vertical 1_2in.stl

Vertical

½ inch

Velcro Mount Vertical 5_8in.stl

Vertical

5/8 inch

Velcro Mount Vertical 3_4in.stl

Vertical

¾ inch

Velcro Mount Vertical 1in.stl

Vertical

1 inch

Velcro Mount Vertical 1.5in.stl

Vertical

1 ½ inch

Velcro Mount Vertical 2in.stl

Vertical

2 inch

Velcro Mount Horizontal 1_2in.stl

Horizontal

½ inch

Velcro Mount Horizontal 5_8in.stl

Horizontal

5/8 inch

Velcro Mount Horizontal 3_4in.stl

Horizontal

¾ inch

Velcro Mount Horizontal 1in.stl

Horizontal

1 inch

Velcro Mount Horizontal 1.5in.stl

Horizontal

1 ½ inch

Velcro Mount Horizontal 2in.stl

Horizontal

2 inch

Printing

Print the parts in the original orientation. All STL files are pre-rotated.

• Material: PLA, PETG, pretty much anything

• Layer height: 0.2mm

• Extrusion width: 0.4mm

• Perimeters: 7 (important for super strength)

• Infill: 0% / doesn't matter

Assembly

• Insert the M2.5 nut into the Skadis T-Nut.

• Stick the M2.5x12mm screw through the Velcro Mount.

• Thread the T-Nut onto the screw and leave it loose so that the T-Nut can freely rotate.

• Position the T-Nut in the vertical orientation and stick the T-Nut through the Skadis peg board.

• Us the alignment guides on the back of the mount to align the part in the center of the peg board hole.

• Tighten the screw. The T-Nut will orient itself in the horizontal position and provide a very secure hold.