
Flashforge AD5X Filament Cutter – Holder Lưỡi Scalpel (Blade Holder)
- Downloads
- 12
- Likes
- 10
- Views
- 217
- Remixes
- 0
- Comments
- 0
Files 3 1.5 MB
- cutter_ad5x_1772309028.stlSTL · 725.6 KB
- utter_ad5x_1772309029.stepSTEP · 668.8 KB
- cutter_ad5x_1772309030.f3dF3D · 147.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #231091
- Category
- Máy In 3D
- Published
Description
🔪 Flashforge AD5X Filament Cutter – Scalpel Blade Holder (Adapted for printing)
A printable holder for standard flat scalpel blades – replaces the original filament cutter blade on Flashforge Adventurer 5X (AD5X).
This part allows you to use cheap, widely available scalpel blades instead of proprietary or hard‑to‑find original blades.
🪒 Blade Compatibility
Designed for standard flat scalpel blades with:
-
Width: 5.7 mm
-
Thickness: 0.4 mm
The blade must be cut down to 13-14 mm in length before installation.
You can easily adapt the model (STEP / F3D files included) to fit blades of other sizes.
🖨 Print Settings
Setting
Value
Material
PETG, ABS, ASA (rigid filament)
Infill
100%
Perimeters
2
Layer height
0.08 - 0.16 mm
Supports
❌ Not needed
🔧 How to Use
-
Print the holder
-
Cut a scalpel blade to 13-14 mm length
-
Insert the blade into the holder – fit is intentionally tight, so no glue is needed.
Use pliers to push the blade all the way in. -
Install the assembly into the printer's cutter mechanism
-
Secure with the original screw
📌 Why This Model?
-
No more searching for OEM blades – use standard scalpel blades
-
Easy to replace – just swap the blade
-
Remix‑friendly – adapt it to any blade size
📦 Files Included
-
STL (ready to print)
-
STEP / F3D (for remixing)
📸 Video
❤ Feedback & Remixes
If you adapt the model for a different blade size – share your remix or leave a comment!
Print spec
- Formats
- f3dstepstl
- Model files
- 3
- Total size
- 1.5 MB
- Largest file
- 725.6 KB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-
New -
New -
New -

-

-

-


