
Tay cầm cho bu lông lục giác M6–M12
- Downloads
- 3
- Likes
- 0
- Views
- 93
- Remixes
- 0
- Comments
- 0
Files 18 66.1 MB
- Knebel_Kerben_M6-M12_1772307509.stlSTL · 2.5 MB
- Knebel_Kerben_Support_M6-M12_1772307511.stlSTL · 4.4 MB
- Knebel_KerbenV2_M6-M12_1772307512.stlSTL · 2 MB
- Knebel_KerbenV2_Support_M6-M12_1772307513.stlSTL · 3.6 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #230848
- Category
- DIY
- Published
- Tags
- thingiverse
- holder
- home
- tool
- prusa
- diy
- handle
- support
- screw
- workshop
- nosupports
- hexagon
- knob
- wheel
- petg
- hex
- nut
- supportless
- part
- bolt
- red
- m4
- screws
- m3
- layer
- m5
- industrial
- m6
- fastener
- bolts
- m12
- useful3dprints
- m8
- cylinder
- knobs
- werkzeug
- m10
- knurled
- thumb
- ho
- height
- thumbscrew
- usefulprint
- toggle
- strength
- fasteners
- m3nut
- variable
- m5nut
- m4nut
- embedded
- m3screw
- knurledknob
- m5screw
- m6screw
- m8screw
- knurling
- m4screws
- thumbscrews
Description
🇩🇪 Beschreibung
Dieser Griff ist dafür ausgelegt, eine Sechskantschraube direkt im Druck zu integrieren.
Vorgehensweise:
Im Slicer kurz vor der Deckschicht über dem Schraubenkopf pausieren, Schraube einsetzen und Druck fortsetzen. So wird die Schraube sauber eingeschlossen.
Tipp:
Die Schrauben vorher mit auf das Druckbett legen, damit sie Temperatur annehmen. So vermeidet man Spannungen durch große Temperaturunterschiede.
Gedruckt wurde mit PETG von Nobufil in der Farbe „Industrial Red“.
🇬🇧 Description
This handle is designed to embed a hex bolt directly during printing.
How to use:
Pause the print in your slicer just before the top layers above the bolt head are printed. Insert the bolt and resume printing to encapsulate it securely.
Tip:
Place the bolts on the print bed beforehand so they warm up. This helps reduce stress caused by temperature differences.
Printed with PETG from Nobufil in the color “Industrial Red”.
🖨 Print Settings
Griff / Handle:
-
6 perimeters (inner & outer walls)
-
5 top layers
-
5 bottom layers
Support-Teil / Support Part:
-
2 perimeters
-
2 top layers
-
2 bottom layers
-
0% infill
Weitere Einstellungen /Additional settings::
-
Außenwand-Geschwindigkeit verdoppelt für saubere Rundung/Outer wall speed doubled for a clean curve
-
Variable Layerhöhe für eine besonders schöne obere Rundung/Variable layer height for a particularly smooth top curve
⚠ Hinweis
Nur für den vorgesehenen Zweck verwenden. Je nach Drucker und Material können Anpassungen notwendig sein.
Print spec
- Formats
- stepstl
- Model files
- 18
- Total size
- 66.1 MB
- Largest file
- 5.1 MB












