Khuôn DIY làm nến “Candle One for ALL”

Use Prusament PETG for better heat resistance.

1. Print the 3 main parts of the mold.
2. Print the desired logos.
3. Remove supports
4. Insert the logos into the mold.
5. Close the mold and tighten it with M6 bolts.
6. Place the candle wick in the holder and position the holder in the designated location.

7. Optional: Apply wide tape to reinforce the bottom of the mold for a better seal.

Il you want to make your own logo downlad :

V2 : Fixed an issue with overhangs at the top