Frieren Landscape

Project: frierenlandscape.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x122.71mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm

#080a0d PLA+ Elegoo Black Transmission Distance: 0.8

#471682 PLA+ Elegoo Purple Transmission Distance: 2

#4d565c PLA+ esun Gray Transmission Distance: 1.4

#ffffff PLA+ Elegoo White Transmission Distance: 5.4

#0000ff PLA+ esun Blue Transmission Distance: 1.5

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #10 (0.88mm) swap to Purple

At layer #13 (1.12mm) swap to Gray

At layer #14 (1.2mm) swap to White

At layer #18 (1.52mm) swap to Purple

At layer #19 (1.6mm) swap to Blue

At layer #20 (1.68mm) swap to Purple

At layer #24 (2mm) swap to Blue

At layer #25 (2.08mm) swap to White for the rest.