Skip to main content
F3D
Adapter Honda EF Civic/CRX cho CF-13 adjustable flasher rel… 1

4 images

DIY

Adapter Honda EF Civic/CRX cho CF-13 adjustable flasher relay

By foonarf_4455328

Downloads
1
Views
67

Files 2 112.7 KB

  • CF-13_adjustable_flasher_relay_EF_adapter-Housing_Base_1772155482.stlSTL · 30.6 KB
  • CF-13_adjustable_flasher_relay_EF_adapter-Housing_Cover_1772155483.stlSTL · 82.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

I have a 1989 Honda CRX Si.  After installing LED turn signal bulbs, I ended up with the hyper-flashing issue.  There are many compatible flasher relays available (like the one linked below), but I couldn't find any that fit the fuse box in my CRX.  The pin size/orientation is correct, but the housing is a few mm too large.

This model is for a replacement housing into which you can install the PCB from one of these relays.

Example part: https://www.amazon.com/dp/B0CWNQJFX9

To install:

  • Snap the existing housing cover off

  • Use wire cutters or a box knife to (carefully) liberate the PCB from the plastic base

  • Press on the replacement base

    • Be careful to note the orientation base plate

    • The side that printed facing up goes towards the PCB)

    • You might need to apply a bit of heat to the connector spades with a soldering iron (be patient, be careful)

  • Snap the top cover on

  • Install the relay into your EF Civic/CRX fuse box

  • Bask in the glory of the metronomic flasher clicks

My guess is this will also fit the DA Integra and other similarly old Honda/Acura cars.

Read more Show less

Print spec

Formats
stl
Model files
2
Total size
112.7 KB
Largest file
82.1 KB

0 comments

See all