Giá đỡ IKEA Symfonisk Sound Controller cho JUNG AS 500

Printing

• Used PLA with smooth PEI plate for better surface finish

• 0.2 mm layers

• 0.4 mm nozzle

• no supports

• Still searching for a filament with matching white tone

Usage

In my case it works fine, without screwing the baseplate to the wall, as the frame is being held by another flush-mounted component. Use superglue to glue in a 1 Euro-Cent coin. This way the magnet inside the Symfonisk Controller holds it securely in place.

Both components should stick together without glue. The small inserts can help taking them apart again if needed.

Inspired by this model from @MichalBartak_152656