
Ron (gasket) cho filter holder dùng lọc dung môi HPLC
- Downloads
- 0
- Likes
- 1
- Views
- 79
- Remixes
- 0
- Comments
- 0
Files 2 83.6 KB
- Filter_holder_seal_gasket_1772145863.stlSTL · 33.5 KB
- Filter_holder_membrane_gasket_1772145863.stlSTL · 50.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #227291
- Category
- Sức Khỏe
- Published
Description
In our laboratory we are using a magnetic filter holder system to filter our HPLC mobile phases and solvents (see picture). The original gaskets are made of a foamy PE material. They wear out by repeated use and a new piece costs 4-5€. A steep price for something so simple.
That said I only printed these with 95A TPU and the seal gasket is too rigid to seal the bottle for filtration. So I'm using the original foamy seal gasket with my printed membrane gasket, that does work. Maybe 85A TPU or a vario TPU works but I don't have those filaments. You can find the seal gasket in the files if you want to give it a try.
Recommended parameters for 95A TPU:
-
Layer height: 0.1 mm
-
Precise Z height: ON
-
Ironing ON: Topmost surface with 'Concentric' pattern
-
Only one wall on first layer: ON
-
Avoid crossing walls: ON
-
Top surface pattern: monotonic lines
-
Bottom surface pattern: concentric
-
Top/Bottom shells: 3-4 so it's solid (membrane gasket) and 10% infill for the seal gasket
Have fun printing!
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 83.6 KB
- Largest file
- 50.1 KB












