Gá DIN Rail cho BTT External 5160 Drivers (TMC5160T Plus)

Din Rail Mount For BTT External 5160 Drivers

This is a robust, high-performance DIN rail mounting solution specifically designed for BigTreeTech (BTT) External 5160 Drivers (TMC5160T Plus). Whether you are running a Voron, VzBoT, or a custom heavy-duty motion system, this mount ensures your external drivers are securely organized and efficiently cooled.

Hardware Requirements

To fully assemble the mount and secure the drivers, you will need:

• 16x M3x6mm or M3x8mm BHCS (Button Head Cap Screws)

Recommended Print Settings

For optimal results and structural integrity, please use the following settings:

• Material: PC-CF (Polycarbonate Carbon Fiber) or PPS are highly recommended.

  • Note: It is best to use high-temperature and stiff filaments to ensure the mount maintains its grip on the DIN rail and withstands the heat generated by high-current drivers.

• Layer Height: 0.2mm

• Wall Count: 4 or more

• Top/Bottom: 4-6

• Infill: 40% (TPMS-D or Gyroid)

• Supports: Enable grid supports for the standoff holes. 

Key Features

• Precision Fit: Tailored specifically for the footprint of the BTT 5160T Plus.

• Standard DIN Rail Compatibility: Snaps securely onto standard 35mm DIN rails.

• Thermal Management: The design allows for adequate airflow around the driver heatsinks.

• Secure Mounting: Uses multiple mounting points and allows sufficient cable management on both sides of the mount.