Muzzle Brake & Threaded Barrel cho Glock Fidget Keychain G26 – Đồ chơi mini trượt

This compact muzzle brake for the G26 Fidget Keychain is based on realistic firearm components and design principles. It features a streamlined profile with three beveled slots, providing a detailed tactical look proportional to the G26 frame.

The model is designed to work with the threaded barrel included in the source model in which is linked in the remix section, the same threaded barrel model will still be provided. It threads directly onto the threaded barrel and is optimized for easy 3D printing without supports. Be careful not to screw on too tight because it can get stuck on the barrel.

Instructions:

Replace the original barrel 3d model with the threaded barrel and screw the muzzle brake onto the threaded barrel. Make sure the three slot holes are facing upwards. If these slots are not facing upward, then turn the threaded barrel until the muzzle brake is in the correct position.

Recommended Print Settings:

• Walls: 4 Perimeters

• Infill: Any

• Supports: No supports are needed (Print vertically)