Insert dấu cộng cho Core One +/L (Plus Insert for Core One +/L)

Since there is no purpose for the little plus on the spool holder, (That I am aware of) I thought designing a little insert would add a nice bit of color.

The plus insert is a press fit, so it should slide in easily without coming out. If it is too tight you can press it down in with a flat surface, or if it is too loose add some supper glue. Since Prusa printers will print mostly the same you should be fine.

Print Settings

Layer Height:

0.1

Support:

NO

Infill :

5%

Brim

NO

Material:

PLA

Filament Designation :

Orange

   More Designs:

Magnetic 3D Benchy for Prusa Core One/+/L

Core One/+ Bed Test Bed Cleaner

Core One/+ Cable Cover Magnetic