Nắp che Shock Tower XRAY XB2 2026 (6-dot)

XRAY XB2 2026 Shock Tower Cover

• Modeled on the 6-dot tower.

• If using pliant material, this will work on the 4-dot as well (just bend it a little)

• If using rigid material like PPA-CF, this will only fit the 6-dot.

The attached 3mf file shows the orientation that I am printing them in. Feel free to experiment.  I've not been successful printing them out of TPU which admittedly would be a better material for this.  My attempts at doing so have all yielded really bad looking parts.

Using ABS the cover feels sturdy enough and compliant enough to use with 4-dot towers also (pictured in blue) but when printed out of PPA-CF it feels indestructible.  I'd rather print 20 and change it several times during a race weekend then have a bad looking TPU version.

I experimented with a variety of thickness and I feel this is the bare minimum to keep wall thickness at the angles thick enough that they don't crack easily on the top radius. 

Uses a single M3 screw to mount through the tab and hold in place.