TI Bredbox Mk I - Hộp phát triển Arduino

Join the printsbyjayy discord server:
https://discord.gg/X9VbhrDzzM

This is a project that was originally posted on thingiverse that is now being cross posted to printables.

Edit 11/2/24: This is an older box. A newer revision of the box is available on my Profile. This box provides a sleeker profile, but the new one has additional features and in my opinion is better for development.

This two-half box was inspired by some of the rugged boxes here on Thingiverse, albeit mine is designed to hold an Elegoo Arduino Uno R3 board as well as a breadbox, and has a programming and power port on the side of the box for the Arduino. I will say that it does not fold together well with components loaded onto the breadboard (you will most likely damage something), but it does work to help you organize if you're someone like me who constantly has to move things around while you tinker.

Post Printing Instructions
Light sanding might be required on the hinges and to get the Arduino and breadboard to fit depending on your printer and it's dimensional accuracy. I used PLA to print mine with about 25% infill percentage with no strength issues. I cut a small piece of PLA to create the hinges between the two halves, but my call out for the hinge dimensions are 3mmID x 20mm.