Chân thay thế dạng tham số cho IKEA Havsta (Parametric Replacement feet)

I placed a Havsta cupboard near a ledge in my floor and needed to rise it by 11mm instead of the default ~5mm, in order to have enough clearance for the ledge. For this reason, the model includes a cutout to allow it to slide over the ledge without touching it.

This replacement foot fits perfectly into the two alignment bores (fit could be tighter, but I couldn't be bothered reprinting it).

I included the model as F3D and STEP files so you can adjust it to your needs.

Printing instructions

Print as oriented (z up) and enable support on build plate. 

I printed it in PLA with 3 walls, layer height 0.3mm using a 0.6mm nozzle, 35% honeycomb infill for vertical strength and it supports the cupboard just fine.