Bảng tên Voron Design SMRRF Name Badge

By VoronDesign

Downloads: 329
Likes: 88
Views: 1,584
Remixes: 3
Comments: 0

Download all (.zip)· 6 files · 9.5 MB· 9.5 MB

Files 6 9.5 MB

RRF_Printed_Badge_Main_Body_1770871954.3mf3MF · 179.4 KB
Name_Plate_Insert_SMRRF_2024_Layer_Swap_1770871956.3mf3MF · 289.4 KB
Name_Plate_Insert_SMRRF_2026_Layer_Swap_1770871957.stlSTL · 912.1 KB
Name_Plate_Insert_Blank_1770871959.3mf3MF · 73.8 KB
Name_Plate_Insert_SMRRF_2024_MMU_1770871960.3mf3MF · 599.4 KB
Voronish_RRF_Badge_1770871961.stepSTEP · 7.5 MB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 3

See all 3 remixes

Details

Model ID: #218869
Category: DIY
Published: 02/12/2026
License: GNU General Public License v3.0
Tags: voron
badge
vorondesign
lanyard
makerchip
smrrf
k2kevin
smrrf2024

Show more tags Show fewer tags

Description

This is a modular name badge created by @kyle_gb, @alexandertmoss, and @hartk on the Voron Design Discord! It is designed to be modular, and allow you to customize it, as well as has a slot for a maker chip to be shown off.

There are two different versions of the Name Plate. The MMU one is designed to be printed on multimaterial capable printers, while the Layer Swap version is intended to be printed with you manually swapping filament at a certain layer to handle the color change.

The name plates are retained in the badge with short sections of 1.75mm filament.

-----
These are the recommended print settings:

Material: Doesn't matter
Layer height: 0.2mm
Extrusion width: 0.4mm
Infill percentage: Doesn't matter
Infill type: grid, gyroid, honeycomb, triangle, or cubic
Wall count: 4
Solid top/bottom layers: 5
-----

K2_Kevin Maker Chip