DIY VR-Treadmill Trash Omni Device addon cho Maratron (T.O.D Frontpart)

These are all three parts you need to build the Frontpart of the T.O.D,
It is an Addon to the DIY Maratron, a DIY VR-Treadmill and it allows you to move sideways via physical movement.

I Printed the Box for the Maus and the upper part solid, the round thing with 6Walls and 30% infill.
But Im pretty shure the upper part would hold up just finde with way lesser infill.

I used basic PLA.

You also need these Parts:
1x M8_60+
1x Ballbearing 608
2x M8 Nuts ! or 4x M8 Nuts if the Screw is longer than 60mm !
9x M5 Nuts (or 5xM5 Nuts and 4xM5 Wingnuts)
4x M5_25
1x M5_40
1x M5 Washer
6x M3_20 Wood Screws
1x Wooden middle plank (5*3 in the cross section)

What I used to connect the wooden plank to the handrail:
2x Angles
4x M5_40 Screws +Washer and nuts
2x M8_80 Screws (everything from *50+ should work) +Washer and nuts

If you want to see how to assemply it, here is the link to my video of it:
https://youtu.be/HVKPNnUlI8E

And if you want to see it in action, just watch the other stuff on my youtube chanel.