
Side saddle Mossberg Maverick 88 (kèm Picatinny rail)
- Downloads
- 4
- Likes
- 2
- Views
- 52
- Remixes
- 0
- Comments
- 0
Files 2 585.6 KB
- Mossberg88 side saddle 6 shell.3mf3MF · 248.3 KB
- Mossberg88 side saddle 8 shell.3mf3MF · 337.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #218169
- Category
- Đồ Gia Dụng
- Published
Description
Side saddle shell holder with picatinny rail for mossberg maverick 88.
-
Holds six 12gauge shot shells
-
Picatinny rail for mounting optics or other accessories
-
View port under picatinny rail for using stock bead sight
you will need and extended pin (40mm long, or use a M5x45 bolt and nut) to mount the back of the saddle to the receiver. The front slides over the chamber section of the barrel. The holes for the pin are intentionally printed at 4mm so they can be drilled out to 0.195 inches (4.9mm) for a precis fit. I use a #11 drill bit for a 0.191 hole, but if you don't have machinist bits a 13/64 works if you're okay with the 0.008 slop(0.2031 hole).
I ended up completely drawing this from the ground up, but it was inspired by https://www.printables.com/model/719476-mossberg-maverick-88-picatinny-railshell-holder
P.S. please excuse the bad print in the photo, I was in a hurry so I was running the printer overclocked at 150% speed with a .42 layer height. I will update the photos when I have time for a proper print.
Print spec
- Formats
- 3mf
- Model files
- 2
- Total size
- 585.6 KB
- Largest file
- 337.3 KB
0 comments
You may also like 12 models
See all-
New -

-
New -

-

-
New -

-
New -

-
New -

-


