
HSW Holder cho máy thổi bụi điện ZARM
Remix of Tường lưu trữ Honeycomb By RostaP
- Downloads
- 1
- Likes
- 2
- Views
- 84
- Remixes
- 0
- Comments
- 0
Files 3 3.1 MB
- Airblower_Holder_V1_1770852778.stlSTL · 1.6 MB
- Airblower_Holder_V2_1770852779.stlSTL · 1.1 MB
- Airblower_Holder_1770852780.f3dF3D · 337.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #217142
- Category
- DIY
- Published
Description
Description
Two versions of an HSW holder for storing a ZARM electric dust blower and its accessories (3 nozzles, 3 brushes) on a Honeycomb Storage Wall.
Functionally, both versions are identical — they only differ in appearance.
The holder will likely fit similar devices with:
-
a blower handle diameter ≤ 47 mm
-
a nozzle connector diameter ≤ 32 mm
The Fusion 360 model is included in case modifications are required.
ZARM electric dust blower reference:
https://www.amazon.de/dp/B0FDGFBNXT?th=1&language=en_GB
Print Settings
-
Filament: PLA or PETG
-
Layer height: 0.2 mm
-
Perimeters: 3 or more
-
Infill: 15 % or more
-
Infill type: Cross Hatch, 3D Honeycomb, or similar
-
Support: Both versions require supports (build plate only); V1 requires more support than V2
Print spec
- Formats
- f3dstl
- Model files
- 3
- Total size
- 3.1 MB
- Largest file
- 1.6 MB












