Móc treo dây rút (Zip Tie) có lỗ bắt vít, in TPU

After seeing some zip ties with screw holes on Amazon, I came up with these hangers for the zip ties I have. I used TPU 95A, 0.2 layer ht, 2 perimeters, 15% Gyroid, no supports. The hole is designed for a #6 screw or similar.

The largest zip tie that will fit is approx. 8.3mm or 0.327 inches wide, measured at its "head". The smaller width zip ties seem to work also. To test, I hung a 6 gallon milk jug (approx. 8.5 lbs / 4 kg) and it held.