Hộp đựng đồ nhỏ (90x47x25mm)

Box for small items (90x47x25mm)

the box consists of three parts and can hold all small items that need to be protected.

The print itself does not require any supports, and the different parts can be produced in a short time in any colour desired.

To keep the lid closed, I used a 4x4mm magnet. The counterpart consists of a 10 mm washer.

Printing is done with a 0.4 mm nozzle. I chose a layer height of 0.2 mm. For the hinges, I recommend a fill level of 50%.

HAPPY.PRINT:-)