Gá quạt Octopus Pro cho threaded inserts

Remix of Mount Octopus Pro cho DIN Rail Bracket & Fan Mount By mmuellerphoto

By Bumble_2341501

Downloads: 0
Likes: 0
Views: 68
Remixes: 0
Comments: 0

Download all (.zip)· 2 files · 478.1 KB· 478.1 KB

Files 2 478.1 KB

Octopus_Pro_Fanmount_InsertVersion_1770596981.stepSTEP · 308.6 KB
Octopus_Pro_Fan_Mount_InsertVersion_1770596982.stlSTL · 169.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #214160
Category: Máy In 3D
Published: 02/09/2026
License: Creative Commons — Attribution
Tags: fan
rail
mountingbracket
octopus
octopuspro

Show more tags Show fewer tags

Description

This is a remix of the Octopus Pro Mount for DIN Rail Bracket & Fan Mount. I made the fanholes 4mm wide and the body 6mm thick so I could use my M3 Ruthex threaded inserts. The fans I've mounted on the top so I could use M3x40mm screws. I used the original spacers with a length of 30mm.

If somebody is interested, this is what I've added in the printer.cfg so they will run at 60% when one of the steppers starts up

[controller_fan stepper_drivers]
pin: # Change this
max_power: 0.6
kick_start_time: 0.5
stepper: stepper_x, stepper_y, stepper_z, stepper_z1, stepper_z2, stepper_z3