
Cây phơi modular cho phụ kiện máy hút sữa và đồ bình sữa em bé
- Downloads
- 251
- Likes
- 60
- Views
- 1,921
- Remixes
- 2
- Comments
- 0
Files 10 90.5 MB
- 10-Arm_V2_1770594726.stpSTP · 391.9 KB
- Extension_1770594727.stpSTP · 1.1 MB
- 5-Arm_V2_1770594728.stpSTP · 211.5 KB
- 10-Arm_V2_1770594729.stlSTL · 17 MB
Make a variant with AI
Build another version of this model.
Remix versions 2
Cây treo phơi đồ dùng máy hút sữa và bình sữa (Modular Drying Tree)ByRasmusA · 07/29/2026
Đai ốc khóa cho Bottle Stand (Bottle Stand Lock Nut)ByJamesDugas_4375165 · 02/09/2026
Details
- Model ID
- #213789
- Category
- Đồ Gia Dụng
- Published
Description
I made this modular tree specifically because my existing tree and every other one I can find requires careful tetris every wash to fit all the highly-irregularly shaped odds and ends.
The5-arm part fits pump flanges, as well as small bottles.
The10-arm part fits nipples, pump valves, bottle caps.
Thegrid consists of 20mm wide slots, and fits bottle air vent parts.
Thebase can be built upextensions as needed.
The female threads are 18x4.0 mm.
The male threads are undersized so there is a ton of clearance to allow running your printer on the coarsest settings for fast printing, and this has the benefit of letting you spin the holders while washing.
Print Settings
Supports:
No
Resolution:
0.6mm+ x 0.25mm
Infill:
60% - (thicken walls until skinny parts are 100% filled)
Filament:
Notes:
All parts except the extension are meant to be oriented flat on the bed and require no supports.
The**extension**, I oriented vertically with a very wide brim to avoid having to use supports to keep the threads smooth, and to avoid an interrupted-thread design which would lay flat with no supports or brim just fine.
Category: Kitchen & Dining
Print spec
- Formats
- stlstp
- Model files
- 10
- Total size
- 90.5 MB
- Largest file
- 28.7 MB
0 comments
You may also like 12 models
See all-

-

-

-
New -
New -

-
New -

-

-

-

-
New

