Skip to main content
F3D
Adapter dẫn 2 filament sang Bowden Tube cho Lack Enclosure 1

5 images

Máy In 3D

Adapter dẫn 2 filament sang Bowden Tube cho Lack Enclosure

By Sgt_Sid_377473

Views
69

Files 2 289.1 KB

  • DualFilamentGuide_1770335377.stlSTL · 217.4 KB
  • DualFilamentGuide-Template_1770335378.stlSTL · 71.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

I wanted an easier way to guide the filament from the top of my Lack Enclosure to the filament detector on my new Prusa Mini+ and still use my original Prusa MK4S mounted filament holder.

This guide is placed directly under the filament holder and passes through the Lack table allowing either filament reel to be used as needed with a minimum of hassle. You can use the guide as printed or add a standard PC4-M10 adapter with a Bowden Tube running to your printer.

To simplify the installation process, I also created a template that can be used mark where to cut the slot on the top of the table and then flip it over to drill a pilot hole through the underside of the table to determine the location of the exit tube (13mm bit required). 

The unit was designed to be printed upside-down and shouldn't require supports, using the default Prusa Slicer settings.

Read more Show less

Print spec

Formats
stl
Model files
2
Total size
289.1 KB
Largest file
217.4 KB

0 comments

See all